-
PCIe-1004 Frame Grabber Test with the SVS-VISTEK GmbH-EoSens2.0MCX12 Camera
This report documents testing the SVS-VISTEK EoSens2.0MCX12 camera with the PCIe-1004 frame grabber, covering camera specifications, ImgGrab software 内部工具, image acquisition steps, and function tests including ROI, pixel format, frame rate, built-in test images, and exposure time.
넶2 2026-11-10 -
Hamamatsu C15550‑22UP Trigger Latency Test
This report adopts direct oscilloscope measurement to test trigger latency of Hamamatsu C15550‑22UP camera paired with PCIe‑1004 CoaXPress frame grabber. It explains FVAL signal generation mechanism, decomposes latency components, provides net‑latency calculation formula, lists measured data under diverse working conditions and critical test notes.
넶3 2026-11-05 -
Testing the Hamamatsu C15550-22UP (Non-GenICam Firmware) with the PCIe1004 Frame Grabber
This test addresses incomplete GenICam XML in some Hamamatsu C15550-22UP firmware, which disables parameter configuration. Using the PCIe1004 CoaXPress frame grabber and ImgGrab software, a custom XML restores camera functions. Tests on ROI, offset, scan mode, exposure, external trigger and cooling switching confirm reliable image acquisition.
넶13 2026-10-30 -
CT-16K500UV100CoF Camera & PCIe3004 CoaXPress Over Fiber Frame Grabber
The CT-16K500UV100CoF is a high-performance scientific camera with a back-illuminated/UV-enhanced 16K TDI line sensor, 500 kHz line rate, dual-array HDR, and TEC cooling. Using a 100 Gbps CoF fiber interface and GenICam standard, it enables high-speed, low-latency imaging. This document covers specifications, operating modes, test setup, and functional tests including ROI, trigger, TDI control, and temperature monitoring for semiconductor, FPD, and PCB inspection.
넶9 2026-09-28
Consultation Hotline
15223365323
Email: info@hello-fpga.com / sales@hello-fpga.com Address: 3A07, Building 17, City Garden, Liangjiang New District, Chongqing, China